Your cargo
One line per package type. Sizes in cm, weight in kg per package.
Compares 20GP, 40GP and 40HQ. Cargo too big for them is checked against Open Top and Flat Rack.
Loading result
Options ranked by fewest and smallest containers. Click one to see its 3D plan.
Add your cargo and press Calculate loading.
Want a freight rate for this load?
Send us the result. Our Port Klang team replies with FCL or LCL rates, usually within 2 hours on working days.
How it calculates
Packages stand upright and can turn 90° on the floor. Stackable packages are stacked when at least 75% of the base is supported, and heavy packages are never put on much lighter ones. Container payload limits are respected.
Real loading differs
Allow 5–10% for dunnage, lashing and loading by hand. Malaysian road weight limits can be lower than container payload — we confirm before booking.
Less than a container?
Under about 15 m³ LCL (shared container) is usually cheaper — you pay per cubic metre, not per box.
Designing machinery or crates? Size them to ship cheaper
Container cost steps up in this order: 40HQ → Open Top → Flat Rack in gauge → over-height or over-width → over-height and over-width.
- Fix the width first. Keep it within 229 cm for an Open Top, never above 243.8 cm if you can help it. Move side-by-side parts front-to-back.
- Then use the length. Open Top takes up to about 1,190 cm, a 40′ flat rack 1,160 cm.
- Go up, not out. If space runs short, stack parts vertically. Height is cheaper than width.
- Measure the furthest point. Lifting lugs, nozzles, skids and brackets count. Remove what can travel separately.
- Watch the weight per piece. Above about 26 t a piece cannot go in an Open Top; it needs a flat rack or splitting.
- If you must go over-width, keep the height under 194 cm from the deck. Over-height and over-width is the most expensive case.
- Keep the centre of gravity in the middle. Over 30 t on less than 5 m needs steel beams under the base.