Call Our Sales
Albee012-713 9629 Wenxin012-952 9629 Kai012-831 9629 Umi012-247 9629 Mei012-236 9629

Free tool · TNS Log Services, Port Klang

Container Loading Calculator

Enter your cartons, pallets or crates. See which container fits — 20GP, 40GP or 40HQ — how many you need, and a 3D loading plan. Out-of-gauge cargo is checked against Open Top and Flat Rack.

Get a free quote → FCL, LCL, Open Top & Flat Rack from Port Klang · reply within 2 hours on working days
20GP590×235×239 cm · 33 m³
40GP1203×235×239 cm · 67 m³
40HQ1203×235×269 cm · 76 m³
20OT579×230 cm usable, open roof
40OT1192×229 cm usable, open roof
20FR562×244 cm deck, 223 cm in gauge
40FR1160×244 cm deck, 194 cm in gauge

Your cargo

One line per package type. Sizes in cm, weight in kg per package.

Container type

Compares 20GP, 40GP and 40HQ. Cargo too big for them is checked against Open Top and Flat Rack.

Loading result

Options ranked by fewest and smallest containers. Click one to see its 3D plan.

Add your cargo and press Calculate loading.

Drag to turn · scroll to zoom

Want a freight rate for this load?

Send us the result. Our Port Klang team replies with FCL or LCL rates, usually within 2 hours on working days.

Get a free quote →

How it calculates

Packages stand upright and can turn 90° on the floor. Stackable packages are stacked when at least 75% of the base is supported, and heavy packages are never put on much lighter ones. Container payload limits are respected.

Real loading differs

Allow 5–10% for dunnage, lashing and loading by hand. Malaysian road weight limits can be lower than container payload — we confirm before booking.

Less than a container?

Under about 15 m³ LCL (shared container) is usually cheaper — you pay per cubic metre, not per box.

Designing machinery or crates? Size them to ship cheaper

Container cost steps up in this order: 40HQ → Open Top → Flat Rack in gauge → over-height or over-width → over-height and over-width.

  1. Fix the width first. Keep it within 229 cm for an Open Top, never above 243.8 cm if you can help it. Move side-by-side parts front-to-back.
  2. Then use the length. Open Top takes up to about 1,190 cm, a 40′ flat rack 1,160 cm.
  3. Go up, not out. If space runs short, stack parts vertically. Height is cheaper than width.
  4. Measure the furthest point. Lifting lugs, nozzles, skids and brackets count. Remove what can travel separately.
  5. Watch the weight per piece. Above about 26 t a piece cannot go in an Open Top; it needs a flat rack or splitting.
  6. If you must go over-width, keep the height under 194 cm from the deck. Over-height and over-width is the most expensive case.
  7. Keep the centre of gravity in the middle. Over 30 t on less than 5 m needs steel beams under the base.